Used Howial Fingerjointing Line, 2009

  • Offer
  • Date
  • Valid until:


Category type Fingerjointing Machine
Category Fingerjointing Machine
Model HVP-25-250


Condition of the item Used
Date of manufacture 2009
Volume 1
  • Specification file1
  • Specification file2
  • Description HOWIAL Brand Finger Joint Type: HVP-25-250 Position 1: HOWIAL Swing Lift Table SH This is used to mount the wood stack to the desired working height and to separate the package into unit parts, all in half. automatic. The separation of wood is as well for battened piles as not slatted, the maximum inclination is 45 °. For stacks of: 1750 x 1750 x 6000mm: max weight: 4 tons Position 2: HOWIAL detacher type VE 1 Transfer and unravel of the unfolded woods by chain arms (adjustable spacing). Possibility of mounting a moisture meter by points. Set to unity by oscillating rule. Position 3: HOWIAL motorized conveyor type RO-3 Transfer of wood to purge saw with lateral stop Device for leaving too wet or too dry wood on roller conveyor. Adjustable feedrate without bearings. End stop and automatic ejection to 90 ° transfer + ejection of poor quality wood. Position 4: Transfer to 90 ° HOWIAL For automatic feeding of the fencing automaton. Position 5: Purge saw AS 31 HOWIAL Saw working from below, with pneumatic control with 3 automatic feed units, transport, positioning of parts and automatic cutting. The control of the saw is by photocell, specially designed for the detection of fluorescent markings as well as the automatic recording of falls. Saw motor power: 4.5 kW Saw blade diameter: 500mm Feeding power: 3 x 1.0 kW Air: 8 bar Maximum feed speed: Approx. 130m / mm Possibility of recording initial lengths and finished. Position 6: HOWIAL Discharge Carpet Notched mat with sheet metal rim: Band width: 350mm Band length: 2000mm Speed: 0.4m / s Position 7: HOWIAL motorized roller conveyor type RO-2 Out of saw with limit stop, L = 6000mm, synchronized with bleed saw, width = 300mm, ejection of wood non-compliant with moisture. Position 8: Chain Conveyor / 90 °: HOWIAL ÜT-3 For cross conveyance of parts on the conveyor to the end-point automaton. 7 Drive chains and automatic control stops. This system allows to order the different lengths of wood. Automatic feedrate (with frequency converter) for automatic feeding of the PLC. Position 9: Fitting automaton: HOWIAL type HVP 25/25 Hydraulic controls, with setting to length and automatic sawing, measurements with electronic readings. 2 milling shafts working vertically. Apposition of the glue by comb. Technical data: Working width (wood width) max: 320mm Working height (wood thickness) max: 160mm Pressure with automatic adjustment up to: 25 tons Milling motor power: 37 kW Speed: 6000 rpm. Cutting shaft diameter: 50mm Saw motor power: 4.5 kW Max. Working section length of teeth and wood species for 20 mm toothing = approx. 310 cm² Cabinet with controls: Automatic measurement adjustment Hydraulic unit: Adjustment automatic pressure control Full protection cabin: with hydraulic unit integrated in the cab Position 9A: Automatic adjustment of all the measurements The change of parameter in the text - Display automatically adjusts the whole chain as well as the pressure of the press . Hazards are also indicated. Position 10: Oest gluing system for PU and combs Position 11: Motorized HOWIAL conveyor type AW 127 Position 11A: Moving stop Position 11B: Stacker Ast 129 Position 12: Slat magazine HOWIAL Position 13: Battery lift with manual unstacking Video: - Translated with google

    Price & Conditions

    Price Ask for price
    Incoterm EXW - ex-works (seller's), goods are at seller's place Country France
    Sells to: Worldwide


    I confirm that I have read and understood Fordaq’s Privacy Statement

    By registering you agree to our General Conditions