Used Fravol Rapid R3 2002 Edgebanders

  • Offer
  • Date
  • Status : The offer has been cancelled.


Category type Edgebanders
Category Edgebanders
Brand Fravol
Model Rapid R3


Condition of the item Used
Date of manufacture 2002
Volume 1
Description Panel thickness mm 10-60
Minimum panel width mm 60
Edge width 15-65
Edge thickness 0,4-16 mm
Feed rate 10-20 m-min
Installed power Kw 9 three-phase + neutral 400V
Overall dimensions mm 3450x900 h 1900
Weight kg 1,300
Towing track with flat and round profile guide upper pressure bar with double row of wheels, with lifting of the upper working groups Teflon-coated GLUE TANK, equipped with a torque limiter, to avoid breakage in the event of tank blockage, 6 resistors .
LOADER for edges in roll for veneer, melamine, PVC and ABS
With pneumatic edge return pin roller for edges in pre-cut strips up to 16 mm thick.
THE PRESSER ROLLER UNIT with one motorized roller and two opposite conical ones, independent pneumatic pressure.
edge shear in roll up to 1 mm ENDING UNIT 2 independent motors, from Kw 0,50 to 12,000 RPM sliding on linear guides and ball bearing runners the motors are tiltable from 0 ° ÷ 15 °, sliding at 45 ° with by two pneumatic cylinders.
TILTABLE GLANING UNIT composed of two independent motors of 0.37 Kw each at 12000 RPM inclinable from 0 ° ÷ 45 ° vertical and horizontal copying discs PVC AND ABS CUTTING SHEAR up to 3 mm complete with roll holder
FIXED BRUSHES GROUP with 2 superimposed motors from Kw 0,37 to 1400 RPM.

- Translated with google

Price & Conditions

Price On demand
Sells to: Worldwide


We are sorry, but this offer is no longer available. But that's okay! Just fill the form below and you will receive tens of similar, fresh leads.

 I confirm that I have read and understood Fordaq’s Privacy Statement

By registering you agree to our General Conditions